Small End Table With Drawer Plans
We're all about modern, minimalist furniture here at Charleston Crafted, as evidenced past things like our modern side tables, panel table and coffee tabular array. Simply, that doesn't mean nosotros don't recognize the importance of traditional article of furniture.
A couple years ago, we did a makeover of my mom'due south bathroom in a single weekend. Information technology really made a huge impact and made her want to update her sleeping room and other parts of her home.
However, she still used her big, beefy furniture and needed something more functional and open up. That'southward where this DIY nightstand with a drawer comes in play.
If you want to build a side table from plywood and simple lumber, cheque out this tutorial!
DIY Nightstand with Drawer and Shelves
This nightstand is a little bit more than advanced than some of the other projects nosotros usually do. The reason why? Well, this is the outset project we've ever washed with drawer slides.
They were really super easy to install, but to add a sliding drawer requires yous to build a drawer every bit well as the tabular array and connect them.
I'm going to go over the basic steps for how to build this bedside tabular array, but if you'd like the full gear up of plans, simply download them correct below!
How to Build a Nightstand with a Drawer
This bedside table was built in iii broad steps: build the base of operations, build the drawer, and connect them.
First, we built the box of the nightstand with 1/2″ plywood. The box, however, doesn't have a front or a top.
The box was fastened to the legs with pocket holes.
Side by side, we cutting the wood for the two shelves and the legs.
The shelves were each four 1″x4″s joined together with pocket holes. We also used a router to make a dainty edge around each shelf.
We joined the box to the legs first then the shelves inside the legs with pocket holes likewise to create a stable base.
Building the Drawer
This nightstand has a fully functional drawer on drawer slides. This drawer adds valuable storage where you lot need it on a bedside table!
The drawer was fabricated to be one″ less wide than the table box and 1/2″ shorter. This way there would exist room for the drawer slides.
The drawer itself is a unproblematic box, with four sides and a bottom. The of import affair to remember when building a drawer is to put your pocket holes on the Back of the back piece and on the Forepart of the forepart piece. This style, they will exist completely hidden in the end.
How to Install Drawer Slides
We bought a pair of 14″ drawer slides that were super easy to install. There are all sorts of stories nearly how you can mess upwardly drawer slides, but allow me tell you the easiest possible way.
The easiest manner to install drawer slides in a nightstand is to place a piece of long 1/4″ plywood inside the box on each side, then put the drawer slides on superlative of the plywood.
Line the slides upwardly with the forepart of the box and so extend them to their full length. Just drill the slides into place with the plywood nether them.
Now, put your drawer on summit of the plywood and line up the drawer slides and screw them into place.
Read my full guide to installing drawer slides without a jig!
Finally, pull the 1/iv″ plywood out. Smash, now your drawer has a 1/4″ clearance on the lesser of the drawer box.
Adding the Pinnacle and Drawer Face
The terminal steps were to add the elevation and drawer face. For this, we cutting a drawer face and glued it onto the drawer front end.
The top of this end table was made with four boards connected with pocket holes and glued onto the box.
Nosotros finalized the build with stain, poly and a glam knob.
This DIY nightstand with a drawer is the perfect choice for anyone going with a more than traditional style. Having this piece as a bedside table allows for hidden storage and to have things on display.
Retrieve, if you lot want to download the DIY bedside table plans, you can do so for FREE and build it yourself!
Prep Time: 30 minutes
Active Time: three hours
Total Time: 3 hours 30 minutes
Difficulty: Medium
Estimated Cost: $x-50
This beautiful nightstand with a drawer and two shelves is a doable DIY project that will allow you to make a custom furniture slice for your bedroom. It tin can likewise be used as a side table or terminate table in another part of your abode.
Materials
- 1 canvas of 1/ii" plywood
- 3/four" boards of your choice
Tools
- Table Saw
- Drill
- Pocket Pigsty Jig
- Router
Instructions
- Build the box top
- Connect the box top to the legs in the corners
- Build shelves and adhere inside of legs
- Build drawer with pocket holes on outside
- Attach drawer to inside of box with drawer slides
- Attach drawer front end to drawer with wood glue
- Attach table top to top of box with wood mucilage
- Stain, poly and add together a knob.
- For full cuts and details, download our Gratis PDF plans in post
Facebook | Instagram | Pinterest | Twitter | YouTube
Tin we send you our newsletter?
Another nifty style to keep up with out latest projects is by joining our weekly newsletter! Become alerts of our latest projects and special peeks behind the scenes!
Follow along on Instagram
Join our online community where we share real time backside the scenes looks at our DIY projects and peeks within our domicile + family!
Source: https://www.charlestoncrafted.com/diy-nightstand-with-drawer/
Post a Comment for "Small End Table With Drawer Plans"